[Amps] Need Advice on Re-soldering Filament Pins on 4-1000A

Amps

[Amps] Need Advice on Re-soldering Filament Pins on 4-1000A

To:	amps@contesting.com
Subject:	[Amps] Need Advice on Re-soldering Filament Pins on 4-1000A
From:	ED MCKIE <kb5gt@cableone.net>
Date:	Fri, 13 Jul 2012 11:02:43 -0500
List-post:	<amps@contesting.com">mailto:amps@contesting.com>

I need advice on how to re-solder the filament pins on a 4-1000A without
damaging the seals.

Appreciate any help,
Ed,  KB5GT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] Need Advice on Re-soldering Filament Pins on 4-1000A, ED MCKIE <=

Previous by Date:	[Amps] corona on a quad, Kathy Bookmiller
Next by Date:	[Amps] TL-922 QSK Boards, Jim W7RY
Previous by Thread:	Re: [Amps] corona on a quad, TexasRF
Next by Thread:	[Amps] TL-922 QSK Boards, Jim W7RY
Indexes:	[Date] [Thread] [Top] [All Lists]