And place the new resistors outside of the coil... (less heat)
Vy 73, de Kees - PA7TWO - M5TWO
DX IS and CW RULES!
Twitter: @PA7TWO
> From: km1h@jeremy.mv.com
> To: robrk@nidhog.net; amps@contesting.com
> Date: Thu, 16 Aug 2012 14:36:56 -0400
> Subject: Re: [Amps] Parasitic Resister Value
>
> Anything between 47-51 Ohms. Get the Ohmite OY series at Mouser,
> etc.....better reliability than carbon.
>
> Carl
> KM1H
>
>
> ----- Original Message -----
> From: "R. Morris" <robrk@nidhog.net>
> To: "AMPS submit" <amps@contesting.com>
> Sent: Thursday, August 16, 2012 1:41 PM
> Subject: [Amps] Parasitic Resister Value
>
>
> > Anyone want to take a guess at the resistor value in a parasitic choke?
> >
> > Have an estate, Amp Supply LA-1000 for check out. Two of the parasitic
> > choke resistors are toast. The other two are so dark as to be
> > unreadable. Any ohm meter reading would be useless. Guess it didn't like
> > a KW on 11 meters.
> > Two watt carbon resistors that are now carbon dust.
> >
> > About a ten turn coil, wrapped tight, on the resistor.
> >
> > The front label says Amp-Supply, the paper sticker on the back says
> > Ameritron.
> > The Ameritron book just says PC-1, PC-4
> >
> > Four 6MJ6/6LQ6 tubes.
> >
> > Before I start reading.......
> >
> > Bob, K2RK
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> >
> >
> > -----
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 10.0.1424 / Virus Database: 2437/5203 - Release Date: 08/15/12
> >
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|