Hi Jim,
A reasonable guess would be some manufacturer's house number for a 1N4245: 1
amp @ 200V PIV.
Something from the 1N400X series, 1N4003 or 1N4004 would be fine substitutes.
73 & Good morning,
Marv WC6W
http://qsl.net/wc6w/
--- On Sat, 8/25/12, Jim Hoge <knowkode@verizon.net> wrote:
> From: Jim Hoge <knowkode@verizon.net>
> Subject: [Amps] diodes for motor driven vacuum variable
> To: "amp reflector" <amps@contesting.com>
> Date: Saturday, August 25, 2012, 8:27 PM
> Hi all,
>
> I have a vacuum variable driven by a 28v motor. Perhaps the
> assembly had come out of some Harris equipment, it certainly
> looks Mil Spec. As part of the limit switch assembly, there
> are 3 diodes, marked TJ4245AKK (maybe TJ4245AXX, the
> printing isn't real clear.) Anyway, here's the question:
> Does anyone have the data sheet for these? I need to know
> what to replace them with as one let the magic smoke out and
> another is broken. I can run the motor without the limit
> switches but I would like to keep that feature. BTW, I will
> be running it on 12 V.
>
> Tnx,
> Jim W5QM
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|