Absolutely not, that "professional" sounds clueless. My own 500ZC and all
the others Ive worked on run 1200W on 10M with ease.
Carl
KM1H
----- Original Message -----
From: "Vasiliy - K3IT" <gokoyev+k3it@gmail.com>
To: <amps@contesting.com>
Sent: Thursday, January 31, 2013 11:37 PM
Subject: [Amps] LK-500Z output on 10m
I'm looking for some info on what should be a typical output for the
LK-500ZB amp on 10 meters. I'm getting 1200W easily on all bands except
28Mhz. The 10m mod is installed. There was the following note included
with amp (from a person servicing them professionally):
tests produced a measured output of at least 1,000 carrier watts EXCEPT
10 meters, which would only produce about 240 watts out due to design
limitations of the pi network. It is not recommended 10 meters be used
does it sound right?
73
Vasiliy
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1430 / Virus Database: 2639/5572 - Release Date: 01/31/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|