Ive used Scotch 27 HV tape for decades on toroids and Teflon insulated wire
in amps and mounted inside weather resistant boxes when experimenting with
something outside.
If HV is an issue it doesnt hurt to use 2-3 layers of tape and then brush on
Q dope.
Carl
KM1H
----- Original Message -----
From: "Steven M. Simons" <ssimons@manitousys.com>
To: <amps@contesting.com>
Sent: Sunday, July 28, 2013 5:35 PM
Subject: [Amps] Tape
You can also use a polyimide tape for wrapping cores or wires. It comes
with a heat tolerant adhesive
Steve Simons
W1SMS
Lunar-Link International
Tel.203.733.2110
ssimons@manitousys.com
Sent from my iPhone
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3209/6027 - Release Date: 07/28/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|