I have the same transformer (ECA 1028) and I am trying to find out its specs.
Did anyone come up with the info on it? I think it came out of a 4k
Ultra, but possibly an 8K Ultra!
73
Mike, KL6M BP51dc http://www.qsl.net/kl6m
-------------------------------------------------------------
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Glen Zook
Sent: 06 April 2011 07:15
To: amps@contesting.com
Subject: [Amps] Transformer i.d.
I now have a transformer that is reportedly rated at 3000 volts at 1 amp.
The transformer is supposedly from either a Henry or Alpha amplifier. It
weighs about 70 pounds. The nomenclature is as follows:
Elect Corp of America
South Gate
p/n ECA 1028
Unfortunately, there is no other information on the transformer such as
which terminal is which tap on the secondary. The primary terminals are
obvious, they are completely different from the terminals on the secondary.
The primary terminals are numbered 6, 7, and 8. These are very large solder
terminals.
The secondary terminals are numbered 1, 2, 3, 4, and 5. These are machine
screw studs mounted on an insulating material. What I really need to know
is how these 5 terminals are configured. I sincerely don't want to have to
apply voltage and then measure the voltage.
Anyone have some information on this particular transformer?
Glen, K9STH
Website: http://k9sth.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|