Carl,
I remeasured the cap, and the two sections are 17-63pF and 24-316 pF, pretty
much what I had measured before N years ago. A single section cap on the
same frame would be 379 pF, or maybe a smidgen more since there would be
coupling between two plates that are separated in the dual-section version.
I used a good quality cap meter and compensated for the lead capacitance.
73,
Jim W8ZR
> -----Original Message-----
> From: Carl [mailto:km1h@jeremy.mv.com]
> Sent: Wednesday, June 25, 2014 4:00 PM
> To: Jim Garland
> Subject: Re: [Amps] Buck-Boost Transformer Selection
>
> Jim, that OEP cap of yours got me looking and it appears that somebody
used
> the full value for that frame. IE; the Cardwell 154-10 is rated at 347pf
and
> that frame length was used for the dual section.
>
> Carl
> KM1H
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|