Amps
[Top] [All Lists]

Re: [Amps] Vendor For Transformer Rewind

To: amps@contesting.com
Subject: Re: [Amps] Vendor For Transformer Rewind
From: "Joe Subich, W4TV" <lists@subich.com>
Date: Sat, 24 Jan 2015 12:07:16 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>

> Is there anywhere in the US that still  has  120/240 volt power?

Most residential in the US is 120/240 - even 123/246 as utilities
push the limits to minimize transmission losses.

Just for fun, I just checked my line voltage.  Here in a semi-rural
area on Saturday morning with no particularly heavy load conditions
(neither heat nor A/C), I'm seeing 122.5/245 V.  If I were rewinding,
I would consider 208/220/230/245 and maybe 260 (or 208/220/235/250)
as I expect the overvoltage to continue to worsen.

The increasing number of devices with switching supplies will not
be impacted by 20% overvoltage, but tubes, etc. don't like even 10%
overvoltage if you're looking to get maximum filament life.

73,

  ... Joe, W4TV


On 2015-01-24 11:44 AM, Martin A Flynn wrote:
Vic
240 is the original operating voltage.   Considering the cost of the
tube, I don't want to starve the filaments by operating at the lower
voltage.

Is there anywhere in the US that still  has  120/240 volt power?

73,  Martin
W2RWJ

On 1/24/2015 11:31 AM, Vic Rosenthal wrote:
But he should have them add a tap for 240, too.

Vic K2VCO /4X6GP

On Jan 24, 2015, at 5:56 PM, Jim W7RY <w7ry@centurytel.net> wrote:

Agreed!
73
Jim W7RY


-----Original Message----- From: Paul Kraemer Sent: Saturday, January
24, 2015 7:06 AM To: maflynn@theflynn.org ; amps@contesting.com
Subject: Re: [Amps] Vendor For Transformer Rewind
Martin
My vote goes hands down to the folks at Heyboer
Paul K0UYA

-----Original Message----- From: Martin A Flynn Sent: Saturday,
January 24, 2015 8:51 AM To: amps@contesting.com Subject: [Amps]
Vendor For Transformer Rewind
A while back I had picked up a Henry 3002A amplifier with a shorted
transformer.   I am interested in locating a vendor to re-wind the
original (or supply a replacement) that will not require butchering
the chassis, along with adding taps on the primary for 208 and 220
(club station is 208, house is 220)

73 W2RWJ
Martin


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>