If it's orthogonal and the holes for the meters and controls line up, it isn't
ugly!
Al
AB2ZY
________________________________________
From: Amps <amps-bounces@contesting.com> on behalf of Glen Zook via Amps
<amps@contesting.com>
Sent: Sunday, November 29, 2015 12:52 PM
To: rdlustri; amps@contesting.com
Subject: Re: [Amps] Ugly Amps
I'll contribute!
I did have to purchase the GI-7bT tubes, but everything else was from my junque
box. The power transformer is from a parted out Johnson Viking Valiant! The
amplifier puts out 850-watts and, with a better transformer, would do quite a
bit more.
http://nebula.wsimg.com/64c93cac786e7174968c0855eca0b53e?AccessKeyId=5DDC3F25F0398F58962E&disposition=0&alloworigin=1
Glen, K9STH
Website: http://k9sth.net
From: rdlustri <rdlustri@charter.net>
To: amps@contesting.com
Sent: Saturday, November 28, 2015 11:16 AM
Subject: [Amps] Ugly Amps
Here's my submission.
After way too long, my Junk Box Amp is up and running. Power supply on the
right, 6m kw (four 4x150a's in parallel) rf deck on the left and 2m 500w
(two 4cx250b's push pull) rf deck on top.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|