------------ ORIGINAL MESSAGE ------------(may be snipped)
On Wed, 2 Dec 2015 17:21:40 -0600, Doug wrote:
>The other I can not read the name as it is very faint.
REPLY:
There is an old trick from the vacuum tube TV days: Cool the tube
down and breathe on it. The moisture in your breath will condense
more heavily on the printing. This works on glass tubes, haven't tried
it on metal.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|