Amps
[Top] [All Lists]

Re: [Amps] FL-2100B Plate Current (Ken Durand)

To: amps <amps@contesting.com>
Subject: Re: [Amps] FL-2100B Plate Current (Ken Durand)
From: Ron Youvan <ka4inm@gmail.com>
Reply-to: ka4inm@gmail.com
Date: Wed, 14 Sep 2016 19:17:08 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
On 09/14/2016 04:14 PM, chris@chrishays.com wrote:

Well, if the shunt were open you would see a pinned meter and it would
possibly burn it out (which would leave you with a dead amp).

  I have seen carbon resistors that have cooked them self to a very low
value, with only a small external color change, wire wound as you
should find here, seldom pull this trick.
--
  Ron  KA4INM - Youvan's corollary:
                Every action results in unwanted side effects.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>