Amps
[Top] [All Lists]

Re: [Amps] 30L1 keying

To: "David Harmon" <k6xyz@sbcglobal.net>, "'David Gow'" <d.gow@frontier.com>, <ka9egw@ka9egw.com>, <amps@contesting.com>
Subject: Re: [Amps] 30L1 keying
From: "Fern Rivard" <crc@cyberlink.ca>
Date: Tue, 27 Dec 2016 22:10:10 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Don K4LAJ makes a nice soft key interface for the 30L1 which installs 
internally in the amp and works very well. He also has a nice quiet replacement 
fan for the 30L1 as well as a nice cooling fan to use with the 32S and kwm-2.
His email address is: vanwagnd@cox.net
73 from Fern  VE7GZ


-----Original Message----- 
From: David Harmon 
Sent: Tuesday, December 27, 2016 9:43 PM 
To: 'David Gow' ; ka9egw@ka9egw.com ; amps@contesting.com 
Subject: Re: [Amps] 30L1 keying 

The ARB -704 works well on my 3KA and 3K Classic X MKll as well...no
problems.
But....don't use the 704 on a Collins 30L-1 with that -160vdc on the
keyline.
Ameritron claims that the 704 will work with the 30L-1 but they don't say
for how long.
My experience keying the 30L-1 has not been good with this unit....it WILL
fail after a period of time.
I have gone back to the original hard ground keying.


73

David Harmon
K6XYZ
Sperry, OK


-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of David Gow
Sent: Tuesday, December 27, 2016 6:27 PM
To: ka9egw@ka9egw.com; amps@contesting.com
Subject: Re: [Amps] 30L1 keying

If you want plug and play  for virtually any transceiver or transmitter to
any amplifier the Ameritron ARB-704 for about $40 dollars does it perfectly.
I am using one with my KX3/KPXA100 driving a Henry 3KA to the legal limit
and it works perfectly.  It is a little pricy but works perfectly.  It
includes an ALC connection if needed/wanted in your particular setup.

Dave
W7VM

-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of
ka9egw@ka9egw.com
Sent: Tuesday, December 27, 2016 1:36 PM
To: amps@contesting.com
Subject: [Amps] 30L1 keying

So I have a 30L1, and am trying to design a keying circuit that will allow
keying the -160V relay line with a radio whose amp-key output is a
common-emitter NPN rated to pull down a max of +100V.not trying to do qsk cw
here; I'm seriously debating keying the amp with an external relay driven
off the station +13.8 bus.if anyone has a better idea I'm all ears.73, Brian
KA9EGW 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>