The FCC rules are very clear. 200 watts PEP output from the transmitter.
Doesn't matter if you have a -20db gain antenna (wet noodle) or a 10Dbd
Yagi.
200 watts output. Period.
73
Jim W7RY
-----Original Message-----
From: RAY FRIESS
Sent: Friday, October 06, 2017 11:44 AM
To: Richard Solomon ; Amplifiers
Subject: Re: [Amps] SB200 on 30 m
A 30 meter beam size would be between a 40 meter and 20 meter size and a lot
of hams build both. A 3 element beam for 30 meters would probably give at
least a 6 db gain, which is equivalent to increasing your transmitter power
by 4 times. A 100 watt transmitter power into a 6 db gain antenna would be
equivalent to running 400 watts into a vertical or dipole which usually have
little gain.
Sent from my Verizon LG Smartphone
------ Original message------
From: Richard Solomon
Date: Fri, Oct 6, 2017 10:35 AM
To: Amplifiers;
Cc:
Subject:Re: [Amps] SB200 on 30 m
From some of the signals I hear on 30,
they must have some very big antennas !!
HI HI
73, Dick, W1KSZ
On Fri, Oct 6, 2017 at 9:17 AM, Chris Hays <chris@chrishays.com> wrote:
From part 97: (excerpt)
§97.313 Transmitter power standards.
......
(c) No station may transmit with a transmitter power output exceeding 200
W
PEP:
(1) On the 10.10-10.15 MHz segment;
....
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of
amps-request@contesting.com
Sent: Friday, October 06, 2017 09:00
To: amps@contesting.com
Subject: Amps Digest, Vol 178, Issue 17
Send Amps mailing list submissions to
amps@contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/amps
or, via email, send a message with subject or body 'help' to
amps-request@contesting.com
You can reach the person managing the list at
amps-owner@contesting.com
When replying, please edit your Subject line so it is more specific than
"Re: Contents of Amps digest..."
Today's Topics:
1. Re: SB200 on 30 M (Joe)
----------------------------------------------------------------------
Message: 1
Date: Fri, 6 Oct 2017 10:51:12 -0500
From: Joe <nss@mwt.net>
To: ka4inm@gmail.com, amps <amps@contesting.com>
Subject: Re: [Amps] SB200 on 30 M
Message-ID: <ea36689b-77ea-954d-10df-49c1d767135c@mwt.net>
Content-Type: text/plain; charset=windows-1252; format=flowed
This is an interesting question.
On the ARRL Page it states,
30 Meters
Maximum power, 200 watts PEP. Amateurs must avoid interference to the
fixed
service outside the US.
Now is that Input Power? Output Power, or ERP Power?
Joe WB9SBD
Sig
*****************
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|