Thanks Victor,
For some reason, I was thinking I read the opposite. Would it then just be
better to apply both screen and full or reduced plate voltage?
Paul.
> On 09/19/2022 11:33 AM Victor Rosenthal 4X6GP <k2vco.vic@gmail.com> wrote:
>
>
> On 19/09/2022 18:17, Paul Decker wrote:
>
> <snip>
>
> > Step 2. With filiment, apply 500v grid to the 4cx1500's but no plate,
> > and 500 v plate to the 8122's let that soak for a while,
>
> <snip>
>
> NEVER DO THIS! If you apply screen voltage without plate voltage, screen
> current will go through the roof and destroy the screen!
>
> Always ensure plate voltage is present before applying screen voltage!
>
> 73,
> Victor, 4X6GP
> Rehovot, Israel
> Formerly K2VCO
> CWops no. 5
> http://www.qsl.net/k2vco/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|