There are a lot of guys using vox.
I find it totally disorienting and feel out of control with VOX. I prefer
positive PTT control and the foot switch provides that.
It's all what you're accustomed to, but I think you'd find that a majority
of those in the top ten would not use VOX.
W5OV
> I understand the use of foot switches in MS and MM and not using VOX. Am
> I the only guy using VOX in single op?
>
> Bill K4XS/KH7XS
>
>
> In a message dated 8/29/2013 1:53:23 P.M. Coordinated Universal Time,
> W5OV@W5OV.COM writes:
>
> Another vote for the clipper switch!
>
> http://www.eham.net/reviews/detail/1810
>
> The Clipper switch has sufficient resistance. Not too much - just
> right.
>
> Highly recommended.
>
> I've been using them for over 30 years - yes, the same ones.
>
> They're industrial-grade and they don't spring apart in the middle of a
> contest like those other cheap bent-metal jobs do.
>
> 73,
>
> Bob W5OV
>
>
> -----Original Message-----
> From: CQ-Contest [mailto:cq-contest-bounces@contesting.com] On Behalf Of
> Joe
> Sent: Wednesday, August 28, 2013 1:41 PM
> To: cq-contest@contesting.com
> Subject: Re: [CQ-Contest] Foot switches ?
>
> The only problem I have with Any foot switch is that it takes too little
> force to activate it, so I have to either tighten the lifting muscle in
> the shins to keep from activating the switch or have the switch like at
> the side near the ball of the foot and use it in a rolling action with
> most of the weight of the foot resting on the floor..
>
> Joe wb9sbd
> Sig
> The Original Rolling Ball Clock
> Idle Tyme
> Idle-Tyme.com
> http://www.idle-tyme.com
> On 8/28/2013 11:24 AM, Tom Horton wrote:
>> For years I used an old j-38 key mounted on a piece of 1/4 plywood.
>> Also
> have used a home made switch with two pieces of aluminum and a spring,
> $3.00
> footswitch found a most any ham swapmeet, a sewing machine foot switch
> and
> one of the best things I ever had was mounting a footswitch to the side
> of
> the cubbyhole of my desk and using it as a "knee" switch. It never
> slipped
> away.
>> 73 and happy footswitching...
>> tom K5IID
>>
>> There is no joy in Mudville!
>>
>>
>>
>>
>> K5IID Tom Horton Hillsboro, TX
>> E sorter for ARRL W5 bureau
>> Same call for 57 years!
>>
>>
>> ________________________________
>> From: Charlie Gallo <Charlie@TheGallos.com>
>> To: Katsuhiro Kondou <kondou@voyackey.net>
>> Cc: cq-contest@contesting.com; kh6lc@hotmail.com
>> Sent: Wednesday, August 28, 2013 10:34 AM
>> Subject: Re: [CQ-Contest] Foot switches ?
>>
>>
>>
>> On 8/28/2013 Katsuhiro Kondou wrote:
>>
>>
>>> This is what I've been using since last year's CQWW SSB at V26B.
>>> http://files.qrz.com/m/jh5ghm/CIMG8305.JPG
>> Nice looking - could probably sell an article to say "Machinist
>> Workshop"
> here in the USA - they do short articles on simple items
>>
>>
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|
