Not knowing the exact intercom circuit layout, I assumed each intercom
unit has both electonics AND speakers at every position. This may or
may not be the case, but if it is, I think you'll need to place ferrites
at each unit on each end.
73, de ed -K0iL
-----Original Message-----
From: rfi-bounces@contesting.com [mailto:rfi-bounces@contesting.com] On
Behalf Of Jim Brown
2) Chokes and other filters should go right at the electronics, not at
the speakers. It
is the electronics that detects the RF, not the speakers.
<p class=MsoNormal><span style='font-size:8.5pt'>This e-mail contains Omaha
Public Power District's confidential and proprietary information and is for use
only by the intended recipient. Unless explicitly stated otherwise, this
e-mail is not a contract offer, amendment, nor acceptance. If you are not the
intended recipient you are notified that disclosing, copying, distributing or
taking any action in reliance on the contents of this information is strictly
prohibited.</p>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|