Is it only when using the satellite? Bring up the channel directory or
satellite signal test screen or something else generated in the box and see
if that moves when you key up, that would take the lna out of the loop.
More likely is rf getting into the video circuit due to poor pin 1
connection or a ground loop between the decoder and tv.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
> -----Original Message-----
> From: rick darwicki [mailto:n6pe@yahoo.com]
> Sent: Thursday, April 09, 2009 14:20
> To: Group RFI
> Subject: [RFI] 40 M and DirecTV
>
>
> Hi,
>
> Before I climb the roof..............
>
> Is there any reason only 40 meters would make my TV picture rotate 10-15
> degrees as I key up? I.E. some relationship or thing in the LNA?
>
> Tons of ferrite on everything but I suspect one of the 40 meter radials
> from the vertical terminates close to the dish and has high RF on the end.
>
> Thanks,
>
> Rick, N6PE ZUT
> ===============================================================
> Remember, E = M * C^2 was not the entire equation.
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|