On Tue, 17 Aug 2010 20:46:05 -0400, Roger (K8RI) wrote:
>I'm just using a common rotator cable in this case, so it's unshielded,
>8 conductor..
Shielding is NOT important, but a twisted pair for each control line
would be a big plus.
>I need to add a grounding lug for the box which is ungrounded.
Is there anything in it besides LEDs and switches? If not, it's not
likely to matter, other than for safety.
73, Jim K9YC
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|