Hi Martin,
This link might help you.
http://www.ifwtech.co.uk/g3sek/clamp-on/clamp-on.htm I built one of these
and it works great. Good luck!
73 Bert, VE3NR (VE3OBU)
-----Original Message-----
From: rfi-bounces@contesting.com [mailto:rfi-bounces@contesting.com] On
Behalf Of Martin Sole
Sent: Wednesday, February 02, 2011 5:17 AM
To: rfi@contesting.com
Subject: [RFI] Clamp on RF meter
I just built a clamp on RF current meter. Worky worky but I'm thinking about
relative levels and how sensitive to make it. I have to think that in a high
power ham station it might be reasonable to expect some current to flow in
various wires in and on a property but what is reasonable? Ideally thinking
that I can set mid-scale to be some sort of good/bad threshold or is it
likely to be too subjective?
Martin, HS0ZED
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|