RFI
[Top] [All Lists]

Re: [RFI] MFJ 1026 used with K3

To: stbradford <stbradford@insightbb.com>
Subject: Re: [RFI] MFJ 1026 used with K3
From: dalej <dj2001x@comcast.net>
Date: Sat, 18 Aug 2012 15:17:45 -0500
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
Hello Smith,

I use the 1026 and K3.  The 1026 is connected to the RX IN and RX OUT.  I use 
it to suppress a neighbor's dimmer light.  I also have the TimeWave ANC4 and it 
works equally good.  I use it on another rig and switch the noise antenna with 
a two position coax switch.  My noise antenna is about 40 feet long and 
positioned on the lot line nearest to the noise.

It used to be a quiet area at my location, but since about the middle 1990's it 
has become riddled with all sorts of garbage noise.  My belief is there is very 
little if any oversight on electronic and electrical devices and the industry 
seems to do their own thing however way it saves them money.  I would like to 
see more stringent mandatory testing of all these gadgets and electrical 
devices paid for by the mfg, BEFORE they can be placed on shelves for sale, 
then testing later from randomly picked off the shelve items to assure the 
production lots are maintaining the same standard as the testing subject.  This 
should be all paid by the mfg and independent test labs do the work, NOT their 
own labs. Results submitted to the FCC for review and possible corrective 
action including fines and removal of the offending device from sales.   

The part 15 sticker on the bottom is not enough.  

That's my little soapbox rant, hi.
73
Dale, k9vuj



On 18, Aug 2012, at 14:25, stbradford <stbradford@insightbb.com> wrote:

> In my quest to silence a nearby plasma television 
> I have turned to the MFJ 1026. Last night on 40 
> meters it proved it's worth and I worked D64K. I 
> am interested in other operators experience with 
> the unit. Between the K3 "noise reduction" and the 
> MFJ the signal was easy copy without the plasma noise.
> 
> My main antenna is the Gap "Titan Dx" and the 
> noise antenna is a random attic dipole broadside 
> to the plasma tv set. Distance to the front of the 
> tv set is around 150 feet.
> 
> Smith Bradford
> W9HAK
> 
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>