How about an aluminum wok ?
Or maybe they dont make them out of aluminum..................
On Jan 2, 2013, at 3:04 AM, dalej wrote:
> Or build your own. Home Depot and buy some roofing flashing, or sheet copper
> from a salvage yard would be nice, I have some here that I use for ground
> straps. Cut out a circle then take a pie slice and bring the open ends
> together and pop rivet. You can make it as big and as deep as you like. You
> could solder too I suppose. Don't forget the hole in the middle for the mike
> or pickup device. Let your imagination run amok.
>
> Dale, k9vuj
>
>
>
> On 02, Jan 2013, at 4:29, "Roger (K8RI)" <k8ri@rogerhalstead.com> wrote:
>
>> On 1/1/2013 10:49 PM, rick darwicki wrote:
>>> I'm considering building the W1TRC arc detector from April 2006 QST.
>>> Any ideas on a cheap source for the parabolic dish?
>>> Worth the effort?
>>
>> Virtually anything that is roughly the desired shape will word, be it
>> plastic or metal: Cook ware, kids snow saucers, etc. Just go into Lowe's,
>> Home Depot, Sears, Koh'ls, or hard ware stores and look around. Let your
>> imagination be your guide.
>>
>> 73
>>
>> Roger (K8RI)
>>
>>>
>>>
>>> Thanks
>>>
>>>
>>> Rick, N6PE
>>> ==================================
>>> Talk is cheap... except when Congress does it.
>>> _______________________________________________
>>> RFI mailing list
>>> RFI@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/rfi
>>>
>>>
>>
>>
>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|