RFI
[Top] [All Lists]

Re: [RFI] Thumper & not the rabbit

To: Gary@ka1j.com
Subject: Re: [RFI] Thumper & not the rabbit
From: EZ Rhino <EZRhino@fastmovers.biz>
Date: Sun, 30 Mar 2014 08:24:32 -0600
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
Why not figure out exactly which panel of sheet metal is thumping, and then 
either pull it tight by attaching a thin cable to it with a sheet metal screw 
and tying it off to a wall, or pushing against it by wedging a 2x4 or something 
against it?

Chris
KF7P




On Mar 30, 2014, at 1:16 , Gary Smith wrote:

Some interesting thoughts. It's for sure RFI that's involved and I am 
ordering a fairly large quantity of ferrite clamps which I plan to 
attach to each coax termination & origin in my system. I'll have some 
left over to try and resolve things like this. 

The most mysterious part to me is how it is a thumping sound just 
like a large sheet is energized in a kinetic nature and vibrating 
against resistance creating a drum like sound using the enclosure as 
the drum head. Very unexpected. The leads to the unit are pretty 
tight and I think it would be a good idea to make loops of matching 
zip cord through the ferrite snap-ons and solder them in series to 
the existing control wires.

This will be a good first step and then mention was made about the 
unit being properly grounded. I haven't looked at that as it was 
installed by a local heating company and I will have to be sure they 
did that.

The tribander is at arm level on the top of the roof of this 1 story 
ranch and if it were higher, there would surely be less rfi to 
contend with. Can't do higher at this time but I've been considering 
hardline, I wonder if this would be of more benefit to reduce the 
RFI? issues or if its the RFI getting into the equipment from wiring? 
Still, there was a very marked improvement in thumping with that new 
balun in line.

Thank you for the attempts to help.

73,

Gary
KA1J

---
This email is free from viruses and malware because avast! Antivirus protection 
is active.
http://www.avast.com

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>