RFI
[Top] [All Lists]

Re: [RFI] "Quiet" 12 volt LED "fixture" (2' or 4')

To: "'W7SLS'" <w7sls.scott@gmail.com>, <rfi@contesting.com>
Subject: Re: [RFI] "Quiet" 12 volt LED "fixture" (2' or 4')
From: "Lloyd - N9LB" <lloydberg@charter.net>
Date: Tue, 29 Jan 2019 13:19:47 -0600
List-post: <mailto:rfi@contesting.com>
Run down to your local RV Superstore and take a look at their RV LED lighting 
offerings.  Take along a pocket radio to check for RFI.

-----Original Message-----
From: RFI [mailto:rfi-bounces@contesting.com] On Behalf Of W7SLS
Sent: Tuesday, January 29, 2019 1:11 PM
To: rfi@contesting.com
Subject: [RFI] "Quiet" 12 volt LED "fixture" (2' or 4')

Hello,

Looking for recommendations for RF quiet 12 volt LED fixture, perhaps 2 feet or 
4 feet long.

Context:

        Intended use is ARES (ham) station at a hospital, to illuminate the 
work area,
        bright enough to read by (not just avoid bumpng into things)

        12 volts is readily available (600 watt solar array, 600 Ah battery 
bank).
                Yes, “12 volts” might actually be “14.5 volts”.

        We have an inverter for 120 VAC, but prefer to minimize 120 VAC items.
        We use VHF / UHF now, and plan to add HF this spring.

        Prefer something that I can “just install” (rather than a bag of LEDs 
to assemble).
        As it is a hospital, UL or equivalent is preferred.

        As it is likely to be self funded, somewhat cost conscious.

Thank you for considering.

Scott
W7SLS

PS:  we also need to illuminate a “100 foot” hall, so as not to trip on 
anything.  Just get 12 volt “rope lights”, and string out as needed?
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
<Prev in Thread] Current Thread [Next in Thread>