[Top] [All Lists]

Re: [RFI] Trying to locate the Part 15 compliance note...

To: rfi@contesting.com
Subject: Re: [RFI] Trying to locate the Part 15 compliance note...
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Thu, 14 Mar 2019 11:21:40 -0700
List-post: <mailto:rfi@contesting.com>
On 3/14/2019 8:30 AM, Dave Cole (NK7Z) wrote:
I have sent my KPA500 to Elecraft to get a compliance check in preparation for a meeting with the vendor, and the owners of the affected stove.

I am considering asking the vendor to pay for this once the amp is proven good...  But that will happen after the RFI issue is solved.


There is absolutely NO technical reason for doing this. By definition, any product that is not intended to act as a radio receiver should be susceptible to radio transmissions. If it is, it is defective in design and/or construction. The only way we could possibly be at fault in an RFI case is if we transmit harmonics, intermod, or spurs ON THE FREQUENCY that a radio receiver is tuned to. Anything else is the fault of the victim product.

73, Jim K9YC

RFI mailing list
<Prev in Thread] Current Thread [Next in Thread>