RFI: Only if you have a near-by strong transmitter and wind that rattles
the joints between sections of the tin roof.
PATTERN: I'd suggest doing a model of the setup using any of the following:
EZNEC: https://www.eznec.com/eznec.htm
4NEC2: https://www.qsl.net/4nec2/
MMANA: http://gal-ana.de/basicmm/en/
That exercise will give you far better information than multiple subjective
opinions.
Dave - WØLEV
On Sun, Mar 21, 2021 at 3:45 AM John Altman <wa4aip@gmail.com> wrote:
> Curious, with a horizontal pattern yagi, some 50ft above a 12x22ft stand
> alone radio shack with a tin roof ... what is the probably of RFI and/or
> pattern distortion?
>
> Your comments will be appreciated, thank you!
>
> John
> WA4AIP
> ARRL Charter Life Member
> 50 Years HAMMING!
>
>
> Sent from my iPad PRO
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
--
*Dave - WØLEV*
*Just Let Darwin Work*
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|