On 3/27/2024 6:44 PM, [email protected] wrote:
Dave -
Thank you for the answers. Luckily, 144 MHz is my only interest so ferrite
chokes might be helpful. We'll see.
In that case, I recommend ten Fair-Rite #31 clamp-ons sized so that
their inner diameter fits the cable pair -- that is, both current
carrying conductors. They should be placed at each noise source. You'll
need to know about the system -- whether it is a single central inverter
that's making the noise, or multiple inverters at each panel. If there
are multiple inverters, I'm recommending ten at each inverter.
73, Jim K9YC
_______________________________________________
RFI mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/rfi
|