KT?X should be KT0DX the list before this one had it correct.
Steve
KT0DX
rtty-request@contesting.com wrote:
>Send RTTY mailing list submissions to
> rtty@contesting.com
>
>To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.contesting.com/mailman/listinfo/rtty
>or, via email, send a message with subject or body 'help' to
> rtty-request@contesting.com
>
>You can reach the person managing the list at
> rtty-admin@contesting.com
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of RTTY digest..."
>
>
>Today's Topics:
>
> 1. Re: HAL P-38 message questions (Jon Harder)
> 2. QSL INFO. (AMeyer3565@aol.com)
> 3. Re: QSL INFO. (Jeff Stai WK6I)
> 4. FT-1000D LSB RTTY settings (Don Hill AA5AU)
> 5. rtty naqp - logs (Jay Townsend)
> 6. RESULTS: [RTTY] FT-1000D LSB RTTY settings (Don Hill AA5AU)
> 7. Re: rtty naqp - logs (Don Hill AA5AU)
> 8. Active beacon monitoring for HF DXers (Dave AA6YQ)
> 9. GS4EZW Qsl's (Julian cleak)
> 10. Where has all the RTTY Gone (WI8W)
> 11. =?ISO-2022-JP?B?GyRCIVobKEI=?= PR =?ISO-2022-JP?B?GyRCIVshISU1GyhC?=
> =?ISO-2022-JP?B?GyRCJXMlLSVlITwheiQqRkAkSiVhITwlaxsoQg==?=
> =?ISO-2022-JP?B?GyRCJV4lLCU4JXMhQTVtRn0lUSVDJS8kckUwRGxFKiRLISobKEI=?=
> (=?ISO-2022-JP?B?GyRCRkNBKjtUPmwjMxsoQg==?=Q)
>
>--__--__--
>
>Message: 1
>From: "Jon Harder" <jon@praxisworks.org>
>To: "RCARIELLO" <RCARIELLO@si.rr.com>, "RTTY Reflecter" <RTTY@contesting.com>
>Subject: Re: [RTTY] HAL P-38 message questions
To: <rtty@contesting.com>
>Date: Sun, 4 Aug 2002 16:02:24 -0000
>
>In the WriteLog Help files, go to the section called
>
>"CW and RTTY and Voice Memory Setup"
>
>and read what it says about % I (for inserting) inside the F Key buffers.
>
>You might also find the rest of the % signs interesting and useful. I've
>printed this out in full to have at hand when setting things up.
>
>73,
>
>Jon K1US
>
>----- Original Message -----
>From: "RCARIELLO" <RCARIELLO@si.rr.com>
>To: "RTTY Reflecter" <RTTY@contesting.com>
>Sent: Sunday, August 04, 2002 14:07
>Subject: [RTTY] HAL P-38 message questions
>
>
>>Hello to all,
>>I am setting up pre-typed messages to send during a RTTY QSO. I would like
>>to be able to personalize these messages by inserting a name, correct
>>
>signal
>
>>report or a comment during the QSO.
>>
>>The HAL software provides for some short message storage that is called
>>
>upon
>
>>with the F5 key and message number or a text file can be loaded for
>>transmission.
>>
>>Is there anyway to insert a command into these messages so that a comment
>>will be asked for then allowing the message to continue?
>>
>>Thanks for your help,
>>Rich AA2MF
>>
>>
>>_______________________________________________
>>RTTY mailing list
>>RTTY@contesting.com
>>http://lists.contesting.com/mailman/listinfo/rtty
>>
>>
>
>
>
>--__--__--
>
>Message: 2
>From: AMeyer3565@aol.com
To: <rtty@contesting.com>
>Date: Sun, 4 Aug 2002 15:55:10 EDT
>To: RTTY@contesting.com
>Subject: [RTTY] QSL INFO.
>
> NEED QSL INFO FOR...TY4DX.
>
>73 ES DX...ALEX...W6ZX.
>
>
>--- StripMime Report -- processed MIME parts ---
>multipart/alternative
> text/plain (text body -- kept)
> text/html
>---
>
>--__--__--
>
>Message: 3
To: <rtty@contesting.com>
>Date: Sun, 04 Aug 2002 13:06:13 -0700
>To: AMeyer3565@aol.com, RTTY@contesting.com
>From: Jeff Stai WK6I <wk6i@twistedoak.com>
>Subject: Re: [RTTY] QSL INFO.
>
>At 12:55 PM 8/4/2002, AMeyer3565@aol.com wrote:
>
>>NEED QSL INFO FOR...TY4DX.
>>
>>73 ES DX...ALEX...W6ZX.
>>
>
> From the ARRL DX Bulletin:
>
>"BENIN, TY. F5MOO, F5CWU, F5AOV and F1PJB are active as TY7Z, TY9F,
>TY4DX and TY6FB, respectively, from Grand-Popo until August 14. QSL
>to home calls."
>
>73 - jeff wk6i
>
>
>Jeff Stai Twisted Oak Winery LLC
>Email jds@twistedoak.com
>Amateur Radio WK6I
>ROC Web Page http://www.rocstock.org/
>
>
>
>--__--__--
>
>Message: 4
>From: "Don Hill AA5AU" <aa5au@bellsouth.net>
>To: "RTTY Reflector" <rtty@contesting.com>
To: <rtty@contesting.com>
>Date: Sat, 3 Aug 2002 18:18:11 -0500
>Subject: [RTTY] FT-1000D LSB RTTY settings
>
>Working with someone trying to get RTTY working using AFSK
>to an FT-1000D. He can transmit high tones but can't receive high tones.
>He can receive down around 1200 hz. He is using the radio in the LSB
>position.
>
>What's the trick to receiving high tones (2125/2295 hz) with this radio
>in the LSB position? Do you have to use the LSB position when using
>AFSK?
>
>I'm guessing it's a filter setting. I suggested also that he could use low
>tones, but I've never used low tones, so don't know what to tell him about
>that route.
>
>Thanks,
>Don AA5AU
>http://www.aa5au.com
>http://www.geocities.com/writelog
>
>
>
>
>--__--__--
>
>Message: 5
To: <rtty@contesting.com>
>Date: Mon, 05 Aug 2002 00:23:17 +0000
>To: rtty@contesting.com
>From: Jay Townsend <ws7i@ewarg.org>
>Subject: [RTTY] rtty naqp - logs
>
>The web page has been updated with the current logs received. If your call
>isn't there then I don't have your log. Feel free to contact me at this
>address with questions.
>
>view log's received:
>
>http://www.ncjweb.com/rttynaqplogs.php
>
>73 Jay Ws7i
>
>
>
>---
>Jay Townsend, WS7I < ws7i@ewarg.org >
>Assistant Manager RTTY NAQP
>
>
>
>
>--__--__--
>
>Message: 6
>From: "Don Hill AA5AU" <aa5au@bellsouth.net>
>To: "Don Hill AA5AU" <aa5au@bellsouth.net>,
> "RTTY Reflector" <rtty@contesting.com>
>Subject: RESULTS: [RTTY] FT-1000D LSB RTTY settings
To: <rtty@contesting.com>
>Date: Sat, 3 Aug 2002 20:41:56 -0500
>
>Thanks for all the replies. Sorry couldn't respond individually
>as there were quite a lot of them. The problem has been resolved
>by moving the Shift-width control
>
>73, Don AA5AU
>
>----- Original Message -----
>From: "Don Hill AA5AU" <aa5au@bellsouth.net>
>To: "RTTY Reflector" <rtty@contesting.com>
>Sent: Saturday, August 03, 2002 6:18 PM
>Subject: [RTTY] FT-1000D LSB RTTY settings
>
>
>>Working with someone trying to get RTTY working using AFSK
>>to an FT-1000D. He can transmit high tones but can't receive high tones.
>>He can receive down around 1200 hz. He is using the radio in the LSB
>>position.
>>
>>What's the trick to receiving high tones (2125/2295 hz) with this radio
>>in the LSB position? Do you have to use the LSB position when using
>>AFSK?
>>
>>I'm guessing it's a filter setting. I suggested also that he could use low
>>tones, but I've never used low tones, so don't know what to tell him about
>>that route.
>>
>>Thanks,
>>Don AA5AU
>>http://www.aa5au.com
>>http://www.geocities.com/writelog
>>
>>
>>
>>_______________________________________________
>>RTTY mailing list
>>RTTY@contesting.com
>>http://lists.contesting.com/mailman/listinfo/rtty
>>
>
>
>--__--__--
>
>Message: 7
>From: "Don Hill AA5AU" <aa5au@bellsouth.net>
>To: "RTTY Reflector" <rtty@contesting.com>
>Subject: Re: [RTTY] rtty naqp - logs
To: <rtty@contesting.com>
>Date: Sat, 3 Aug 2002 20:58:12 -0500
>
>Looks like around 140 logs so far. That's pretty impressive. I ran the
>CW NAQP yesterday and even though I had fun it wasn't nearly as much
>fun as RTTY. It was a lot of work! Spoiled by the easy operating RTTY
>mode I guess.
>
>Almost the same thing happened in the CW test as what we experienced
>during the RTTY test. An hour into the contest the bands went completely
>dead. Not a signal anywhere. Since I already had a 2 hour break planned
>for dinner, I stayed with it and started hearing signals about 10 minutes
>later. - Whew!
>
>Worked a lot of the regular RTTY guys and it was great to see them on
>that mode.
>
>I even made 4 QSO's on 160M using my tribander and rig antenna tuner.
>I wonder why the RTTY NAQP does not have 160M? I think we may have
>discussed this once before, but I don't remember what the answer was.
>
>I was surprised at all the signals I could hear with my tribander on 160 that
>were
>non-existent on my 80M wire.
>
>73, Don AA5AU
>
>----- Original Message -----
>From: "Jay Townsend" <ws7i@ewarg.org>
>To: <rtty@contesting.com>
>Sent: Sunday, August 04, 2002 7:23 PM
>Subject: [RTTY] rtty naqp - logs
>
>
>>The web page has been updated with the current logs received. If your call
>>isn't there then I don't have your log. Feel free to contact me at this
>>address with questions.
>>
>>view log's received:
>>
>>http://www.ncjweb.com/rttynaqplogs.php
>>
>>73 Jay Ws7i
>>
>>
>>
>>---
>>Jay Townsend, WS7I < ws7i@ewarg.org >
>>Assistant Manager RTTY NAQP
>>
>>
>>
>>_______________________________________________
>>RTTY mailing list
>>RTTY@contesting.com
>>http://lists.contesting.com/mailman/listinfo/rtty
>>
>
>
>--__--__--
>
>Message: 8
>Reply-To: <dhb@attbi.com>
>From: "Dave AA6YQ" <dbernsteinsprint@earthlink.net>
>To: <dx-list@yahoogroups.com>, "'Bernie McClenny, W3UR'" <bernie@dailydx.com>,
> <1000mp@mailman.qth.net>, <425list@425dxn.org>,
> <digitalradio@yahoogroups.com>, <dx-chat@njdxa.org>,
> <dx-list@yahoogroups.com>, <dx-news@pro-usa.net>, <icom@mailman.qth.net>,
> <KenwoodTS-2000@yahoogroups.com>, <psk31@yahoogroups.com>,
> <rtty@contesting.com>, "'Robert Brown'" <bobnm7m@cnw.com>,
> <beacons@ncdxf.org>
>Cc: <dxlab@yahoogroups.com>, <dhb@attbi.com>
To: <rtty@contesting.com>
>Date: Sun, 4 Aug 2002 05:54:44 -0700
>Subject: [RTTY] Active beacon monitoring for HF DXers
>
>The NCDXF/IARU International Beacon Network is an excellent resource for
>Dxers interested in assessing "actual propagation", as distinguished
>from "predicted propagation". Described in
>http://www.ncdxf.org/beacon.htm, this network comprises 18 stations
>around the world that continuously transmit on the 20m, 17m, 15m, 12m,
>and 10m bands. Given a receiver, an accurate clock, an omnidirectional
>antenna, and a quick wrist, one could listen to each of the 18 beacon
>station's 10 second broadcasts on each of 5 bands over a 15 minute
>(18x10x5 => 900 seconds) interval.
>
>In practice, manually monitoring all of the beacons takes longer than 15
>minutes. The expedient approach is to pick a band and listen for each of
>its beacons before moving on to the next. If your antenna is
>directional, pointing it at one set of beacons and then listening to
>each band of interest will be more efficient, though harder on your
>wrist. There are several beacon monitoring software applications that
>will tell you where and when to listen; for such applications to be
>effective, your PC clock must be accurate to the second -- easily
>achievable using freeware utilities (e.g. AboutTime, available via
>http://www.arachnoid.com/abouttime/index.html) that use the internet to
>synchronize your PC's clock with accurate time standards. MFJ recently
>announced a hardware device that uses WWVH to maintain an accurate
>timebase and LEDs to indicate which beacon is currently active on what
>band.
>
>Last year, I released an application called PropView that uses the
>IONCAP engine to generate graphical propagation forecasts. When used in
>conjunction with DXView, such forecasts can be produced by entering a
>callsign or clicking on a map location. A sample PropView forecast can
>be viewed at http://www.qsl.net/propview/propview.jpg .
>
>The purpose of this note is to publicize a new set of capabilities
>recently added to PropView. One can now create a beacon monitoring
>schedule, either by band, by bearing from your QTH, or by choosing an
>arbitrary set of beacons; see http://www.qsl.net/propview/beacons.jpg,
>for example. PropView computes the optimal schedule for the beacons you
>choose. If Commander (a transceiver control application for Icom,
>Kenwood, TenTec, and Yaesu transceivers) is running, PropView can
>automatically QSY your radio to monitor the specified beacons; if DXView
>is running, PropView can direct it to appropriately rotate your antenna
>as required by the monitoring schedule. Together, these applications
>make it easy to quickly assess "actual propagation".
>
>PropView, Commander, and DXView are all members of the freeware DXLab
>suite, and are available via www.qsl.net/dxlab; given the relatively
>rapid release frequency, please review www.qsl.net/dxlab/download.htm
>before attempting to download or install any of these applications. If
>you have suggestions for improving the new beacon monitoring (or any
>other) functionality, please post them on the DXLab reflector at
>http://groups.yahoo.com/group/dxlab/ .
>
>In the meantime, I will be extending PropView to
>
> - use a soundcard to permit continous capture and analysis of the
>specified beacon transmissions
>
> - use IONCAP to continuously generate forecasts for each beacon/band
>combination, contrasting these forecasts with monitored beacon
>performance to improve overall forecasting accuracy
>
> 73,
>
> Dave, AA6YQ
>
>
>--__--__--
>
>Message: 9
To: <rtty@contesting.com>
>Date: Mon, 05 Aug 2002 10:57:51 +0100
>From: "Julian cleak" <julian.cleak@newport.gov.uk>
>To: <rtty@contesting.com>, <writelog@contesting.com>
>Subject: [RTTY] GS4EZW Qsl's
>
>Hi all
>
> Just returned from the Isle of Eigg.
>
>Had a great time, will update the GW4EZW website when I get a chance
>we made 1400 QSO's give or take a few, this was a mixture of
>Iota contest, Russian RTTY Contest, SSB, CW and RTTY.
>
>The qsl's are not ready yet, I have to get my XYL ( GW8SBK ) to draw
>one so that we can get them printed so bear with us for a week or so.
>
>Every contact made will get a card via the bureau. If you don't
>get one in the next year or so sent a request to gw4ezw@fsnet.co.uk
>
>and we will resend one, on a serious note though if any direct cards
>are required please send the request to GW4EZW with SAE and
>postage, or postage to cover envelope etc and we will send as
>soon as they are printed.
>
> Many thanks de Julian ( GW4JBQ )
>
>
>--__--__--
>
>Message: 10
>From: "WI8W" <wi8w@arrl.net>
>To: <rtty@contesting.com>
To: <rtty@contesting.com>
>Date: Mon, 5 Aug 2002 10:26:25 -0000
>Subject: [RTTY] Where has all the RTTY Gone
>
>Is it just my imagination or am I missing something here?
>
>I am just getting into RTTY and I am having a devil of a time even finding
>RTTY stations on the air except during contests. I can receive RTTY from
>the ARRL bulletins ok but I sure would like to hook up with someone to make
>sure that the transmit side of things are working ok.
>
>I have called CQ for many times in the last month and have gotten no
>contacts. Am I on the wrong sideband? Inverted? Wrong frequency? I just
>wonder if I have something (or many) things set wrong.
>
>
>I run MMTTY, Writelog and a Yaesu FT-920. The manual for data comms on this
>radio is real confusing and stuff I have gotten from the web do not make it
>any clearer.
>
>
>Any help would be appreciated.
>
>73
>
>Thom WI8W
>
>
>--__--__--
>
>Message: 11
To: <rtty@contesting.com>
>Date: 5 Aug 2002 20:05:27 +0900
>To: <rtty@contesting.com>
>From: =?ISO-2022-JP?B?GyRCRkNBKjtUPmwjMxsoQg==?=Q <info@3q3q.com>
>Subject: [RTTY] =?ISO-2022-JP?B?GyRCIVobKEI=?= PR
>=?ISO-2022-JP?B?GyRCIVshISU1GyhC?=
> =?ISO-2022-JP?B?GyRCJXMlLSVlITwheiQqRkAkSiVhITwlaxsoQg==?=
> =?ISO-2022-JP?B?GyRCJV4lLCU4JXMhQTVtRn0lUSVDJS8kckUwRGxFKiRLISobKEI=?=
>
>$B"#"#"#"#"#"#"#"#"#"#"#!!%X%C%@!<9-9p$rJg=8!!"#"#"#"#"#"#"#"#"#"#"#"#"#(B
>$B"#(B
>$B"#$3$NItJ,$N%X%C%@!<9-9p$rJg=8$$$?$7$^$9(B(35$BJ8;z!_#59T%"%I%l%94^$`!K!#(B
>$B"#$"$J$?$N%5%$%H$N$*F@>pJs$r$*5RMM$K$*CN$i$;$7$^$;$s$+!)(B
>$B"#$*Ld$$9g$o$;$O(B kei@3q3q.com $B$^$G$I$&$>!#(B
>$B"#(B
>$B!z!y!z!y!z!y!z!y!z!y!z!y!z!y!z!y!z!y!z!z!y!z!y!z!y!z!y!z!y!z!y!z!y!z!y(B
>
>
> $BAO4)9f!!(B2002/08/05$BH/9T(B
>
>$B!!!!!!!!(B $BO7J^$J$i$G$O$NIJ<A$H?.Mj$r$"$J$?$K$*FO$1$$$?$7$^$9!*(B
>
>$B!!!!!!!!!!(.(,(/(.(,(/(.(,(/(.(,(/!!(.(,(,(,(,(,(,(,(,(,(/(B
>$B!!!!!!!!!!(-%&(-(-%-(-(-%&(-(-%-(-!!(-!!#3#Q%^%,%8%s!!!!(-(B
>$B!!!!!!!!!!(1(,(0(1(,(0(1(,(0(1(,(0!!(1(,(,(,(,(,(,(,(,(,(0(B
>
> $B#1#0#0!sJ]>Z%7%g%C%T%s%0%b!<%k!zFCA*;T>l#3#Q!z(B
>$B!!!!!!(B
> http://www.3q3q.com/
>
>$B!z!y!z!y!z!y!z!y!z!y!z!y!z!y!z!y!z!y!z!z!y!z!y!z!y!z!y!z!y!z!y!z!y!z!y(B
>
>$B$3$s$K$A$O!"FCA*;T>l#3#Q;vL36I$N(Bkei$B!z$G$9(Bm(__)m
>$B$D$$$K#3#Q%a!<%k%^%,%8%s$N%?%$%H%k$,7h$^$j$^$7$?!*;%KZ;T$K$*=;$^$$$N@P(B
>$B@nMM(B($B$=$NB>#6L>MM(B)$B$,9M$($F$/$@$5$C$?!V%&%-%&%-#3#Q%^%,%8%s!W$K7hDj!*!*(B
>
>$BFCA*;T>l#3#Q$G$O855$$$$C$Q$$$*E9$N$*F@>pJs$r$4>R2p$r$7$F$$$/$D$b$j$G$9(B
>$B$_$J$5$^$+$i$N!V%&%-%&%-!W>pJs$r$*BT$A$7$F$*$j$^$9(B(^o^)
>$B08@h$O!"(Bmailto:info@3q3q.com
>
>$B!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A(B
>
>$B"!L\<!"!(B
>
>$B"!=k$$2F$K$T$C$?$j$N%"%&%H%I%"FC=8(B
>$B!!!!!&%"%&%H%I%"!!2f$,2H$NCN7CB^(B
>
>$B"!#3#Q$3$@$o$j$N$*E9>R2p!c(BPR$B!d!!!!!!!!!!!!!!!!!!!!!!(B
>$B!!!!!&$9$Y$F$N?M$K;H$$$d$9$$$b$N$r!AJ8K<6q$$$A1RLg!A!!(B
>$B!!!!!&?M@8$N%+%i$5$H$&$^$_$*EA$($7$^$9!A$Y$C$T$s%-%`%A!A(B
>$B!!!!!&0lN.@_7W;N8fMQC#!A@=?^MQ;f20!A(B
>$B!!!!!&=;$^$$$O0&$NF~$lJ*$G$9!A%j%U%)!<%`20!A(B
>
>$B"!2F$N$*$9$9$a1G2h(B
>$B"v"v"v"v!!3'$5$s:G6a1G2h8+$F$k!A!)!!"v"v"v"v(B
>
>$B"!:#7n$N$*$$$7$$%l%7%T(B
>$B!!!!!!!A2F%P%FKI;_$K$O%4!<%d!*!A(B
>
>$B!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A(B
>
>$B!|!|!|!|!|!|!|!|!|!|!|!|!|!|(B
>$B%"%&%H%I%"!!2f$,2H$NCN7CB^(B
>$B!|!|!|!|!|!|!|!|!|!|!|!|!|!|(B
>
>$B"!!~"!!~(B
>$B!@(B(^$B#O(B^)$B!?BT$A$KBT$C$?2F5Y$_$G$9!#!@(B(^$B#O(B^)$B!?!!!!!!(B
>$B3'$5$s$N$42HDm$O%-%c%s%W$r7W2h$5$l$F$^$9$+!)(B
>$B%-%c%s%W$N3Z$7$_$O!"$J$s$H8@$C$F$b?);v$G$9!#(B
>
>$B?):`$rIe$i$;$J$$0Y$KI9$,I,MW$G$9!#!J;d$K$ONd$($?%S!<%k$K@dBPI,MW$G$9!K(B
>$B$=$NI9$O5mF}%Q%C%/$G4JC1$K=PMh$^$9!#$+$i$N5mF}%Q%C%/$r$-$l$$$K@v$$$^$9(B
>
>$B?e!J=PMh$l$P>t?e$rMO$1$?8e$b0{$a$^$9!K$r#93dDxEYF~$l$^$9!#(B
>$B!J?e$,E`$C$?>l9gBN@Q$,A}$($k$?$a%Q%C%/$NGKB;KI;_$G$9!K#2!A#3F|A0$K$O(B
>$BNdE`8K$KF~$l$^$7$g$&!#$3$&$7$F$*$1$PI9$,Dy$^$C$FMb!9F|!J7P83>e!K$^$G$O(B
>$B==J,$K;}$A$^$9!#$b$A$m$s>r7o$K$h$C$FJQ$o$C$F$-$^$9!#(B
>
>$B"!!~"!!~(B
>$B:G6a$O!"%"%$%9%3!<%R!<$d%8%e!<%9$N%Q%C%/$K$O38$,IU$$$F$$$^$9!#(B
>$B$3$l$@$HNdE`8K$K2#$K$7$F$bNm$l$J$$$7!"MO$1$?8e$b;H$($^$9!#(B
>$B$b$A$m$s!"G~Cc$d%8%e!<%9$J$I$rE`$i$;$F$b$h$$$G$7$g$&!#(B
>
>$B"!!~"!!~(B
>$B;H$C$?8e$N5mF}%Q%C%/$O!">e<j$K3+$$$FFbB&$r>e$K$9$l$P!"(B
>$B;H$$<N$F$N$^$JHD$H$7$F$b;H$($^$9!#(B
>
>$B"!!~"!!~(B
>$B5mF}%Q%C%/$K$O!"%m%&$N@.J,$,4^$^$l$F$$$k$N$G!"(B
>$BCe2P:`$NBe$o$j$K;H$C$FC:_u$7$K;H$($^$9!#(B
>$B2f$,2H$G$O!"KhG/@aLs$N%-%c%s%W$G3Z$7$s$G$^$9!#3'$5$s$b$$$+$,$G$9$+!#(B
>
>$B!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A(B
>
>$B!z!y!z(,(BPR$B(,!!!!!@(B(^$B#O(B^)"$BJ86q(B"$B$$$A1RLg(B(^$B#O(B^)$B!?!!!!(,(,!z!y!z(B
>
>$B"'F|K\0l$NK|G/I.$rHNGd$9$k!!(B"$BJ86q(B"$B$$$A1RLg"'(B
>$BF|K\0l$NK|G/I.$+$i:##H#O#T$JJ86q$^$GE9<g$NA*$j$9$0$C$?J86q$r>R2p!*(B
>$B$5$i$K$O!"CN$C$FF@$9$kJ86q$NN"5;$*$7$($^!A$9(B
>$B%\!<%k%Z%s$N%$%s%/$,$"$k$N$K=q$1$J$/$J$C$?;v$C$F$"$j$^$9$h$M(B
>$B$=$s$J;~$O!D>\$7$/$O$3$A$i$N$r%/%j%C%/"*(B < http://www.e-bunguya.net >
>
>
>$B!z!y!z(,(BPR$B(,!!!!!@(B(^$B#O(B^)$B$Y$C$T$s%-%`%A(B(^$B#O(B^)$B!?!!!!(,(,!z!y!z(B
>
>$B!|>H$j$D$1$kF|:9$7$K%S!<%k$NNL$,A}$($kKhF|$G$9!#!|(B
>$B!!(B $B$=$s$J$4<g?MMM$K$O!"2F%P%F$N62I]$,Gw$C$F$^$9!#(B
>$B:#$3$=%-%`%A%Q%o!<A43+$G!"2F%P%F$J$s$+?a$-Ht$P$7$^$7$g$&!#(B
>$B%-%c%s%W$N$*6!$K$b$I$&$>!*!*(B
>$B!|(B $B%-%`%A$N$*?=9~$O$3$A$i"M(B http://www.beppinkimchi.com/$B!|(B
>
>
>$B!z!y!z(,(BPR$B(,!!!@(B(^$B#O(B^)$B$3$@$o$j$N@=?^MQ;f@lLgE9(B(^$B#O(B^)$B!?!!(,(,!z!y!z(B
>
>$B!X(B $B@_7W;NI,8+!*6b;}$AIc$5$s$K$J$k%3%D!*(B $B!Y(B
>
>$B0lN.@_7W;N$,$D$$$KK=O*!*LY$+$k$?$a$N!"@_7W%3%9%H:o8:J}K!!*(B
>$B!!!!!!!!!!$=$NJ}K!$H$O!":#$9$0"-"-"-$r%/%j%C%/(B
>$B!!!!!!!!!!!!!!!!!!(Bhttp://www.seizuyoushiya.com
>$B!!!!!!!!!!!!!!!!(B
>**********************************************************************
>
>
>$B"v"v"v"v!!3'$5$s:G6a1G2h8+$F$k!A!)!!"v"v"v"v"v"v"v"v"v"v"v"v"v"v"v"v"v(B
>
>$B6a:"$N1G2h4[$O2;6A$b$$$$$7!"0X;R$N:B$j?4CO$b$$$$$7!"%9%/%j!<%s$NC<$G8+(B
>$B$F$b$A$c$s$H;zKk$b8+$l$k$7!*1G2h4[$N?t$bA}$(!"BgJQ8+$d$9$/$J$j$^$7$?$M(B
>
>$B$5$F!"1G2h$H8@$($P!"KM$,Cf3X@8$N$H$-!"$"$k@h@8$,(B
>$B!X1G2h$O0lHVA0$G8+$k$N$,0lHVGwNO$,$"$C$F$*$b$7$m$$$>!<!*!Y$H8@$o$l$FAa(B
>$BB.Ev;~$O$d$C$F$$$?!"!X%P%C%/%H%%!&%6!&%U%e!<%A%c!<!Y$r0lHVA0$G!"$7$+$b(B
>$B$*$b$7$m$+$C$N$G!"#32s$b8+$F$7$^$$!"<s$H$*?,$,DK$+$C$?;W$$$,$"$j$^$9!#(B
>$B:#$N1G2h$G$O$I$3$K:B$C$F$b8+$F$bGwNO$O0l=o$G$9$1$I$M!*(B
>
>$B!z(B $BOC$,JQ$o$C$F!":G6a$*$b$7$m$+$C$?1G2h>R2p!*!*!z(B
>
>$B:#2s$N%$%A%*%7!*$O!X%9%Q%$%@!<%^%s!Y@N%F%l%S$G$b$"$C$1$I!"$3$l$,1G2h4[(B
>$B$G8+$k$H$d$C$Q$jGwNO$,0c$&!*%K%e!<%h!<%/$rIqBf$K<+J,$bHt$s$G$$$k!)$h$&(B
>$B$J5$J,$K$J$k$s$@$h!<$s!*!!%9%H!<%j!<$b86:n$,%^%s%,$J$N$G$H$F$bC1=c$G$9(B
>
>$B$G$b!"FbMF$O%^%s%,$N$h$&$J$N$OL5$$$G$9$h!#$A$c$s$HNx0&ItJ,$b$"$k$7!"$=(B
>$B$l$H=*$o$j$+$9$k$H%Q!<%H-6$b$"$j$=$&$J$N$G!"3Z$7$_$G$9$M!<!*$&!<$s!"$3(B
>$B$l0J>e$7$c$Y$C$A$c$&$H!"=i$a$F8+$k?M$N$*3Z$7$_$,$J$/$J$k$N$G$3$l$/$i$$(B
>$B$G!&!&!&(B
>
>$B%9%Q%$%@!<%^%s$N>R2p(BURL$B$O!!(Bhttp://www.spider-man.jp/
>
>$B<!2s$b:G6a$N1G2h!&%S%G%*$N$*4+$a>pJs$r8D?ME*E83+$G$9$,!">R2p$7$A$c$$$^(B
>$B$9!A!*$=$l$+$i$*4+$a1G2h$,$"$C$?$i!"$<$R>R2p$7$F2<$5$$!#(B
>$BEj9F$O!!(Bmailto:info@3q3q.com
>
>$B%O%$!!$=$l$G$O!"3'$5$s%5%$%J%i!"%5%$%J%i!"%5%$%J%i!&!&!&(B
>
>$B!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A!A(B
>
>$B!z!y!z(,(BPR$B(,!@(B(^$B#O(B^)$B%j%U%)!<%`@lLgE9(B
>$B!X#U#N#I#F#Y!Y(B(^$B#O(B^)$B!?(,(,!z!y!z(B
>
>$B!!!!!!!!!!!!Cm0U!*!*!!$=$N%j%U%)!<%`!"$A$g$C$H$^$C$?!A!*(B
>
>$B!z(B $B<:GT$7$J$$0Y$K!*#5$D$N%]%$%s%H(B
>$B"*(Bhttp://www.unifyjapan.com/5.html
>
>$B!z(B $BA}2~C[$G$N%H%i%V%kNc!*(B $B"*(B
>http://www.unifyjapan.com/zoukaichiku.htm
>
>$B!z(B $B$"$J$?$N2H$O%j%U%)!<%`$I$-!)(B
>$B"*(Bhttp://www.unifyjapan.com/doki.html
>
>$B!}(B $B%j%U%)!<%`@lLgE9(B
>$B!X#U#N#I#F#Y!Y$N%j%U%)!<%`$*=u$1%5%$%H(B(^o^) $B!}(B
>$B$/$i$7$N$*LrN)$A>pJs$b$"$k$h!*(B $B"*"*(B
>http://www.unifyjapan.com$B"+"+(B
>
>$B!z!y!&!&!E!E!D(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,(,!D!&!&!&!&!&!&!y!z(B
>
>$B!|!|CN$C$FF@$9$k(B! $B:#$9$0<+J,$G$G$-$k=;$^$$$N$*<jF~$l>pJs!*!|!|(B
>$B!!!!!!(B $B!|!|(B $B%-%C%A%s$N$*<jF~$l(B $B!Z%7%s%/JT![!|!|(B
>
>$B4V0c$C$?$*<jF~$l$r$7$F$$$F$O!"Bg@Z$J=;$^$$$r=}IU$1$F$7$^$$$^$9!#(B
>$BF&<-E5$r;29M$K!"$+$7$3$/%-%l%$$K$*A]=|$7$^$7$g(B (*^_^*)
>
>$B!XIaCJ$O!&!&!&!Y?e?!$-$9$kDxEY$G(BOK$B$G$9!#(B
>
>$B!X$A$g$C$H1x$l$?$i!&!&!&!Y(B
>$B%9%]%s%8$K%/%j!<%`%/%l%s%6!<$r$D$1$FCzG+$KKa$-!"?e$G@v$C$F%+%i?!$-(B
>$B$7$^$9!#1_$rIA$/$h$&$K$9$k$H:Y$+$$1x$l$b$h$/Mn$A$^$9!#6bB0%?%o%7$J$I(B
>$B$O!"=}$,$D$-$d$9$$$N$G!"8E$$%9%H%C%-%s%0$J$I$K$/$k$s$G;H$$$^$7$g$&!#(B
>
>$B!XGS?e8}$^$o$j$NL}$h$4$l!Y(B
>$BCf@-@v:^$K>CFGMQ%(%?%N!<%k$r>/NL:.$<!"%9%]%s%8$GKa$-$^$9!#Bg:,$N@Z$l(B
>$BC<$J$I$GKa$/$H$h$/Mn$A$^$9$h!*(B
>
>$B!XGS?e$+$4!Y(B
>$B8E$$;u%V%i%7$K%/%l%s%6!<$r$D$1$F1x$l$rMn$H$7$^$9!#(B
>$B<X8}$NIU$1:,$J$I$NKa$-$K$/$$$H$3$m$b!"8E$$;u%V%i%7$KN}$j;uKa$-J4$r$D$1(B
>$B$F$3$9$j$^$9!#?e?!$-$7!"$d$o$i$+$$I[$GKa$1$P%T%+%T%+!*(B
>
>$B!z%W%i%9%A%C%/$N%9%]%s%8Bf$d;03Q%3!<%J!<$O!"Bf=jMQ$N;@AG7OI:Gr:^$K0lHU(B
>$B$D$1$?8e!"$h$/?e@v$$$9$l$P=|6]$b=PMh$^$9!#(B
>$B!zGS?e$+$4$K%I%i%$%d!<$rEv$F!"%+%i%+%i$K4%$+$9$H!":Y$+$$1x$l$,$]$m$]$m(B
>$BMn$A$^$9!#(B
>
>$B!|<!2s$O!"!H!y%-%C%A%s$N$*<jF~$l(B
>$B!Z%l%s%8$^$o$jJT
