RTTY
[Top] [All Lists]

[RTTY] Re: RE: ÄRTTYÅ RITTY 4.5 Issue

To: rtty@contesting.com
Subject: [RTTY] Re: RE: ÄRTTYÅ RITTY 4.5 Issue
From: Jan Palmquist <jan.palmquist@mailbox.swipnet.se>
Date: Sat, 23 Oct 2004 17:00:14 +0200
List-post: <mailto:rtty@contesting.com>
I compare to my settings...

H should be 0 as second DMA is 00? I'm not sure how this works, I got 5.
T6 is only if you have that type of board.
I have "suggest MS-DOS mode as necessary" checked.

73's de Jan/SM5FUG

> Let me recap.  With all the information being passed, I am loosing site of
> the target here.  I am running Win98SE.    I have the sound card set up with
> this configuration based on the data that is selected in the device manager
> under resources.
> 
> Use automatic setting is checked
> 
> IRQ 05
> DMA 01
> DMA 00
> I/O 0280-028F
> I/O 0300-0301
> I/O 0388-0388
> 
> No Conflicts
> 
> So in the autoexec.bat file I should add the following line?
> 
> SET BLASTER= A280 I5 D1 H1 P300 T6
> 
> Now if this does not work, what parameters shall I change?  
> 
>  The next issue is when I Go to properties on the desktop shortcut.  If I go
> into the Advanced tab on the Program tab, there are choices for running this
> software.  Currently  "suggest MS-DOS mode as necessary" is checked.  Is
> this correct? Or do I select "MS DOS mode"  
> 
> If I select MS DOS MODE,  it gives me two additional choices.
> 
> "USE CURRENT MS-DOS CONFIGURATION" or  ""SPECIFY A NEW MS-DOS MODE"
> 
> Which is the proper one to check.
> 
> Tony - N2KI
> SYSOP - N2KI DX CLUSTER
> dxc.n2ki.com:7300
> RF Gateway 145.650
> Website: www.n2ki.com
> DX Spoken Here
> 
> 
> > -----Original Message-----
> > From: rtty-bounces@contesting.com [mailto:rtty-
> > bounces@contesting.com] On Behalf Of Bill Turner
> > Sent: Saturday, 23 October, 2004 11:57
> > To: n2ki@amsat.org
> > Cc: RTTY
> > Subject: Re: [RTTY] RITTY 4.5 Issue
> > 
> > On Sat, 23 Oct 2004 10:33:16 -0400, A.J. Cioffi wrote:
> > 
> > >There are two autoexec.bat files in my system.  One resides in
> > >C:\Windows\Command\EBD  and I have one that resides in  C:\
> > >
> > >Which autoexec.bat file does RITTY look at when starting?
> > 
> > _________________________________________________________
> > 
> > RITTY doesn't read the autoexec.bat file.  It's your operating system
> > that reads it, and as far as I know, it only reads the one in C:\.
> > 
> > --
> > Bill W6WRT
> > 
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> 
> 
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
> 

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>