HI Marty
You have to check the setup in MMTTY and set it for AFSK or FSK. If you are
using FSK and it is set for AFSK, or if your are running AFSK and it's set
for FSK, it will just put out a steady carrier. 73 and gl
Tom W7WHY
> Hi Guys, I need some help here. I've been running MMTTY into my Icom 756
> proII on the only serial port my computer had tied in with a RascalGLX.
> Today I took it all apart and installed 2 more serial ports, so I could
> also
> have rig control on this radio. Rig control is up and running on com 1.
> RascalGLX is on com8. It will key the radio, I hear RTTY on the computer
> speakers,
> receiving RTTY on the screen. When I call CQ, I hear my rtty on my
> speakers,
> but only sending out a single tone when I listen to my signal on another
> radio
>
> When I hook the Rascal back up to com 1 now, it's the same thing. Either I
> have hooked up the Rascal wrong, or have changed something important in
> MMTTY
> setup. I can't find the documentation on the Rascal.
>
> Please Help,
> Marty Haley AB5GU
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|