Hello''
Sorry about the delay in my answer. This e-mail is on my puter out in the
barn.. Yes, I've seen T Boone's work on this project..Good idea, Grand
Haven has been using CNG in busses for several years now.. We actually have
a station in Muskegan that sells it..
C'ya,
dad
Harry Coates
WA8HC1@charter.net
----- Original Message -----
From: <rtty-request@contesting.com>
To: <rtty@contesting.com>
Sent: Saturday, October 11, 2008 12:00 PM
Subject: RTTY Digest, Vol 70, Issue 16
> Send RTTY mailing list submissions to
> rtty@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.contesting.com/mailman/listinfo/rtty
> or, via email, send a message with subject or body 'help' to
> rtty-request@contesting.com
>
> You can reach the person managing the list at
> rtty-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of RTTY digest..."
>
>
> Today's Topics:
>
> 1. Re: Double buffers? (David Wilburn)
> 2. Re: Double buffers? (Rick Ellison)
> 3. Re: Double buffers? (Andrew O'Brien)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 11 Oct 2008 02:10:03 -0400
> From: David Wilburn <dave.wilburn@verizon.net>
> Subject: Re: [RTTY] Double buffers?
> To: RTTY Reflector <rtty@contesting.com>
> Message-ID: <48F0433B.7010804@verizon.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Great stuff, thanks. It is all about having the macro setup, and
> timing. I use N1MM / MMTTY.
>
> David Wilburn
> NM4M
>
>
>
>
> Ed Muns wrote:
>>> Where do I find out more about the additional buffer(s) that
>>> allow a station running, to reply to two stations, one after
>>> the other?
>>
>> AA5AU describes the macro to do this in WriteLog in his tutorial on
>> www.rttycontesting.com. The form most people use is:
>>
>> NM4M TU NW W0YK 599 CA
>>
>> If you log the NM4M QSO while he is sending his exchange to you, and put
>> the
>> W0YK call sign in the Entry Window, then the macro is written with
>> parameters that select the n-1 call sign or the current call sign.
>>
>> This is a great technique to use under the principle "Slow Down to Win".
>> Instead of coming back to the first clear call sign you get in a pile-up,
>> wait ("slow down") for a second to see if another call sign will emerge.
>> If
>> you can get two or more call signs out of each pileup, then you can use
>> the
>> above macro to cut your QSO time in half. You eliminate a CQ and its
>> response. Instead you only send the exchange along with the prior QSO's
>> QSL
>> message (the macro above) and then copy the exchange sent to you and send
>> another QSL message.
>>
>> 73,
>> Ed - W0YK
>>
>> _______________________________________________
>> RTTY mailing list
>> RTTY@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
>>
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 11 Oct 2008 08:19:34 -0400
> From: "Rick Ellison" <rellison@twcny.rr.com>
> Subject: Re: [RTTY] Double buffers?
> To: "'David Wilburn'" <dave.wilburn@verizon.net>
> Cc: 'RTTY Reflector' <rtty@contesting.com>
> Message-ID: <20081011122005.24E7E1B607FF@dayton.contesting.com>
> Content-Type: text/plain; charset="us-ascii"
>
> David..
>
> If you look at the N1MM yahoo group and search back 2 weeks ago you should
> find discussion about this. But for now here is the run down...
>
> In N1MM this is called callstacking. There are 2 ways to get calls onto
> the
> stack.
> 1. Create a macro that has {SOCALLSTACK} in it. By typing a call into the
> entry window and hitting the Function key that has that macro in it will
> place calls into the stack.
>
> Or
>
> 2. When a call is displayed on the RX window hold the ALT-Key down and
> click
> on that call sign. This is the fastest way to get calls onto the stack..
>
> After that place this macro string into a function key. I usually use
> F-12.
> {TX}{ENTER}! {LOGTHENPOP} TU NW {F5}{F2}{RX}
>
> When you have calls on the stack and you go to log your current contact
> instead of hitting your F3 key to log it hit F12 This will allow you to
> work
> stations in succession....
>
> 73's Rick N2AMG
>
>
> -----Original Message-----
> From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
> Behalf Of David Wilburn
> Sent: Saturday, October 11, 2008 2:10 AM
> To: RTTY Reflector
> Subject: Re: [RTTY] Double buffers?
>
> Great stuff, thanks. It is all about having the macro setup, and
> timing. I use N1MM / MMTTY.
>
> David Wilburn
> NM4M
>
>
>
>
> Ed Muns wrote:
>>> Where do I find out more about the additional buffer(s) that
>>> allow a station running, to reply to two stations, one after
>>> the other?
>>
>> AA5AU describes the macro to do this in WriteLog in his tutorial on
>> www.rttycontesting.com. The form most people use is:
>>
>> NM4M TU NW W0YK 599 CA
>>
>> If you log the NM4M QSO while he is sending his exchange to you, and put
> the
>> W0YK call sign in the Entry Window, then the macro is written with
>> parameters that select the n-1 call sign or the current call sign.
>>
>> This is a great technique to use under the principle "Slow Down to Win".
>> Instead of coming back to the first clear call sign you get in a pile-up,
>> wait ("slow down") for a second to see if another call sign will emerge.
> If
>> you can get two or more call signs out of each pileup, then you can use
> the
>> above macro to cut your QSO time in half. You eliminate a CQ and its
>> response. Instead you only send the exchange along with the prior QSO's
> QSL
>> message (the macro above) and then copy the exchange sent to you and send
>> another QSL message.
>>
>> 73,
>> Ed - W0YK
>>
>> _______________________________________________
>> RTTY mailing list
>> RTTY@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
>>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sat, 11 Oct 2008 08:30:26 -0400
> From: "Andrew O'Brien" <andrewobrie@gmail.com>
> Subject: Re: [RTTY] Double buffers?
> To: rtty@contesting.com
> Message-ID:
> <1d87eb7f0810110530l7e1870cbxac187885f33e6723@mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Thanks Rick, I have been one the receiving end of the "now K3UK" macro
> and wondered how it was done.
>
> Andy K3UK
>
>
> On Sat, Oct 11, 2008 at 8:19 AM, Rick Ellison <rellison@twcny.rr.com>
> wrote:
>> David..
>>
>
>>
>> After that place this macro string into a function key. I usually use
>> F-12.
>> {TX}{ENTER}! {LOGTHENPOP} TU NW {F5}{F2}{RX}
>>
>> When you have calls on the stack and you go to log your current contact
>> instead of hitting your F3 key to log it hit F12 This will allow you to
>> work
>> stations in succession....
>>
>> 73's Rick N2AMG
>>
>
>
> ------------------------------
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
> End of RTTY Digest, Vol 70, Issue 16
> ************************************
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|