RTTY
[Top] [All Lists]

Re: [RTTY] SO2R

To: "rtty@contesting.com" <rtty@contesting.com>
Subject: Re: [RTTY] SO2R
From: Ken K6MR <k6mr@outlook.com>
Date: Mon, 28 Sep 2015 13:17:53 -0700
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
I’m still relatively new at this so the answer to this question may be “we’ve 
always done it this way…”

After GM3XXX sends his exchange, why do you send his call again (GM3XXX TU M7T 
QRZ) ? You sent his call, he responded, so you have the call correct. Seems 
like wasted bits and time. And if that TU message gets garbled the other 
station might think you have the call wrong.  A simple TU M7T QRZ would appear 
to be enough.

I see most people do it (I don’t) but I don’t see the reason.

Ken K6MR




From: David G3YYD
Sent: Monday, September 28, 2015 12:24
To: rtty@contesting.com
Subject: Re: [RTTY] SO2R


As a SO2R operator the CQ call is key. If made too short, for instance CQ M7T, 
then it does not give enough time for a complete reply to my CQ call on the 
other radio to be made. The idea is to time it so as soon as one radio has 
finished it is time to transmit on the other. 

As a consequence I use CQ M7T M7T M7T CQ this gives sufficient time for someone 
to call me on the other radio with GM3XXX GM3XXX. Then there is no apparent 
delay in my answer to GM3XXX and it allows me to send GM3XXX 59914 GM3XXX, 
While someone is calling me on the other radio in response to my CQ call. 

Of course it falls apart if someone calls me after a CQ with M7T M7T de GM3XXX 
GM3XXX GM3XXX PSE K which unfortunately too many people do. I know my call so 
please do not send it and de is a total waste of time as for PSE K enough said. 
If you have a call that is GM3XXX then twice is sufficient if you have a short 
callsign like my contest call then M7T three times is OK.

Then at the end of the contact I reply GM3XXX TU M7T QRZ again sufficiently 
long to enable someone to call me on the other radio or send the exchange so I 
can reply to them without any apparent delay.

I also make use of the ESC key to cut short messages on a radio so I can 
initiate the reply on the other radio faster. So for instance CQ maybe 
truncated so it becomes CQ M7T M7T.

By the way if you think SO2R is complex then I also operate the radios second 
receivers as well when a contest slows up.

73 David G3YYD aka M7T in contests

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty


_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
<Prev in Thread] Current Thread [Next in Thread>