> My suggestion is to adjust the RF gain so little noise is being heard
> anyway. Then QSK operation is easy on the ears.
As I recall, the RF gain pot is really touchy and has little range
at the top, then drops off very quickly. Not easy to adjust in
the one I had. Perhaps a log taper pot should go in where there
is a linear taper pot. But I agree, that is a good simple solution
to the bandnoise during QSK, it can really help the ears.
Clark
WA3JPG
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|