>
I can tune the Pegasus and get from very low (< 3 watts) to a full 100 watts
with
about a 1.00 to 1 SWR; however, when I key the mic I always get 0 watts out!
(The
software interface and the tuner agree on the wattage - except very low end.)
It
doesn't matter if I press the momentary button or the maintained one. PTT / VOX
switch is in the PTT position. No battery is in the mic, but I installed one
temporarily with the same results. All interface indications are that I'm
transmitting, but with 0 watts out!
What is the next thing to check?
(If it's as simple as the last question I had I'm going to feel real dumb! <g>
)
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|