TenTec
[Top] [All Lists]

[TenTec] Jumper wire in Corsair filter

To: <tentec@contesting.com>
Subject: [TenTec] Jumper wire in Corsair filter
From: csturner@falcon.csc.calpoly.edu (Clark Savage Turner)
Date: Mon, 17 Apr 2000 13:48:53 -0700 (PDT)
On Mon, 17 Apr 2000, Avila, Edward wrote:
> 
> Just purchased Corsair II without filters and bought and installed the 500hz
> filter. I notice the jumper on the 18.khz filter was cut, do I really need
> to put jumper back in since I don't now have the 1.8khz filter? What's the
> downside if I don't?

No big deal, you'll just hear the receiver drop out if you switch to any
narrow position while in SSB mode.  I put in a jumper across the 1.8
filter slot with .01 uF blocking cap and get a little wider receive in the
1.8 position that way :-) .

Clark
WA3JPG

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>