Re: [TenTec] The problem with directly end fed wires

To:	<tentec@contesting.com>
Subject:	Re: [TenTec] The problem with directly end fed wires
From:	"Tommy" <aldermant@alltel.net>
Reply-to:	tentec@contesting.com
Date:	Tue, 23 Mar 2004 09:21:11 -0500
List-post:	<mailto:tentec@contesting.com>

AHMEN!!!!!

Tom - W4BQF

>
> I still stand on the position that a center fed wire of any length, fed
with
> a balanced feed from a tuner will perform best as an all band
configuration.
> If it is reasonably well balanced, no RF in the shack will exist, with or
> without a ground.
>
> 73
> Bob, K4TAX
>

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [TenTec] Capture area (was 80 meter loops), (continued) Re: [TenTec] Capture area (was 80 meter loops), Sinisa Hristov Re: [TenTec] Capture area (was 80 meter loops), ac5e Re: [TenTec] Capture area (was 80 meter loops), ac5e Re: [TenTec] Capture area (was 80 meter loops), Jason Buchanan Re: [TenTec] Capture area (was 80 meter loops), Sinisa Hristov [TenTec] The problem with directly end fed wires, Stuart Rohre Re: [TenTec] The problem with directly end fed wires, Robert & Linda McGraw K4TAX Re: [TenTec] The problem with directly end fed wires, Stuart Rohre Re: [TenTec] The problem with directly end fed wires, Barbara Maloney Re: [TenTec] coil wire source, Stuart Rohre Re: [TenTec] The problem with directly end fed wires, Tommy <= Re: [TenTec] The problem with directly end fed wires, JAMES HANLON Re: [TenTec] The problem with directly end fed wires, Joe Giacobello Re: [TenTec] The problem with directly end fed wires, Stuart Rohre RE: [TenTec] The problem with directly end fed wires, Rick Westerman Re: [TenTec] The problem with directly end fed wires, Joe Giacobello Re: [TenTec] The problem with directly end fed wires, Stuart Rohre Re: [TenTec] Capture area (was 80 meter loops), JAMES HANLON Re: [TenTec] Capture area (was 80 meter loops), ac5e [TenTec] Re: End Fed Antennas [Was: Capture area], edoc Re: [TenTec] Re: End Fed Antennas [Was: Capture area], Sinisa Hristov

Previous by Date:	Re: [TenTec] Orion vs. RX-340 TT Rcvrs., Carl Moreschi
Next by Date:	Re: [TenTec] Orion in action, Tommy
Previous by Thread:	Re: [TenTec] coil wire source, Stuart Rohre
Next by Thread:	Re: [TenTec] The problem with directly end fed wires, JAMES HANLON
Indexes:	[Date] [Thread] [Top] [All Lists]