Ken, Try plugging a voltmeter into the 12v accessory RCA jack on the rear of
the Omni. Also fix a place to measure the voltage between the ps and Omni
power jack. When you key down the rig, check for voltage drop difference
between the two points. Should be no greater than half a volt. If it is, you
are loosing energy at the molex connector, fuse holder/fuse, and possibly the
power switch contacts. Prime suspect is the molex connector where there is
minimal metal on the pins and socket, especially for running continuous power
in digital modes. LMK what you discover.
73, Mike
AC5P
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|