Hi all,
I finally am getting a chance to look into a small problem with my Triton IV
analog. When using ssb, I key up and will not get any output. Usually a light
tap on the case would fix it, but is is getting worse. I took the top cover
off and have narrowed the problem to the circuit card that is in the front
center of the rig. I removed the metal cover over the board and found that if
I press on the far right tunable capacitor on the rear of the circuit card the
problem goes away only to return a short while later. I am wondering if this
could be just an intermitant connection or something more complex. Any help
would be great. I had this rig back for other repairs about 3 months ago, and
about three weeks after I got it back this problem showed up. I really would
prefer not to send it in for repairs again...
Thanks,
Lou
KC2RVD
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|