Hi Peter,
Thanks for the information. It does work on my Omni VI version 3. I
usually use a Logikey K-3, so seldom make any adjustments to the
internal keyer. Nice to know about this feature though.
DE N6KB
> Assuming that the Option III is very similar to the Plus, press the st button
> in the upper right hand corner of the front panel. Then press the cw button.
> when both are depressed the upper right part of the dial, to the right of
> the frequency readout, will show the internal keyer speed. Below that is
> what I call weight, with 1.00 being "normal" and something above that being
> progressively "heavier."
>
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|