TenTec
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TenTec] 4229 Tuner Balun Replacement?

from [Steve Hunt] [Permanent Link][Original]
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] 4229 Tuner Balun Replacement?
From: Steve Hunt <steve@karinya.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 14 Nov 2010 18:18:11 +0000
List-post: <tentec@contesting.com">mailto:tentec@contesting.com> 
If that's a problem I would prefer to use a couple of high value 
resistors to leak the charge to ground, rather than compromise the 
current balance on the TL.

Steve G3TXQ

On 14/11/2010 17:48, Dr. Gerald N. Johnson wrote:
> Sometimes we need that ground to keep from having the tuner
> capacitors arcing to ground from static pickup on the antenna when
> charged clouds pass.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [TenTec] 4229 Tuner Balun Replacement?, Don Jones
Next by Date:  Re: [TenTec] 4229 Tuner Balun Replacement?, Jim Brown
Previous by Thread:  Re: [TenTec] 4229 Tuner Balun Replacement?, Dr. Gerald N. Johnson
Next by Thread:  Re: [TenTec] 4229 Tuner Balun Replacement?, Jim Brown
Indexes:  [Date] [Thread] [Top] [All Lists]