Make sure the memory back up (9 volt battery) clip is not shorted if you have
not replaced the battery. Also check the wire originally twisted into a loop...
if its cut, the rig will transmit almost on any HF frequency.
73,
Gary -AB9M
Sent via the Samsung Galaxy Tab® 3 Lite
-------- Original message --------
From: Rod Greene via TenTec
Date:08/27/2017 3:47 PM (GMT-06:00)
To: Discussion of Ten-Tec Equipment
Cc: Rod Greene
Subject: [TenTec] Paragon 585
All,
I recently picked up a Paragon at a swap meet. It's really dirty and probably
hasn't been turned on in awhile. Any precautions or suggestions before (and as)
I put power to it and start checking it out? Condition: One small cut out in
the top panel and it has all the filter slots filled. Looks complete and good
otherwise.
Thanks and 73, Rod/w7zrc
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|