Greetings,
My blue screen Jupiter is having xmt issues. Built in auto-tuner will
tune initially, and rig will briefly xmt full power but after a little
xmting it stops and puts out 0 watts and tuner will no longer tune.
Problem persists when switching to dummy load (including feedline swap).
Anyone out there seen this problem before and / or have some ideas of
the likely issues causing this?
I contacted TT service by email, yet to hear back -- but it looks like
it is quite a cost just to ship it to TN and for them to diagnose the
issue and if they still carry the parts necessary to fix it.
(which may result in a substantial cost and yet the rig being returned
w/out any repairs performed.)
- - - -
I have no back-up rig and was wondering if anyone out there has a TT rig
in excess to their needs they would sell to a loving home ;-)
if so let me know what you have and what you want for it.
(note: i am willing to drive 5 to 6 hours to avoid make it easy on
seller and rig if you are close enough to my QTH)
Rob N9KX Indiana
my email is good on QRZ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|