hi all
well after several attempts an suggestions i have now managed to put
together a 70ft vertical section or (40.5 deg elec) with a 20ft capacitance
hat mounted at the very top will attempt now to put 4 sloping wires to
make up the diffrence in the electrical lenght needed to compensate for the
short vertical section an then will attempt to match it after the ground
radials are installed.
I am curuous for opinoins of what software to buy to help in modeling yagis
an verticals for the hf an the low bands
thanks skip ws9v let you know the progress
--
FAQ on WWW: http://www.contesting.com/topband.html
Submissions: topband@contesting.com
Administrative requests: topband-REQUEST@contesting.com
Problems: owner-topband@contesting.com
|