| To: | <Topband@contesting.com> |
|---|---|
| Subject: | Topband: T Vertical |
| From: | "Tom Homewood" <w1to@adelphia.net> |
| Date: | Tue, 23 Sep 2003 08:16:46 -0400 |
| List-post: | <mailto:topband@contesting.com> |
I modeled a T vertical on EZNEC. My target was to get a design with zero reactance at the feed point. The vertical distance was per W1TSP's criteria. With 59 feet of vertical, two horizontal wires of 64 feet each and eight 60 foot radials. I got a feed impedance of 18.19 + J 0.4599 ohms at 1.83 mHz. The take off angle is 26 degrees. 73, Tom, W1TO _______________________________________________ Topband mailing list Topband@contesting.com http://lists.contesting.com/mailman/listinfo/topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: T loaded vertical, Tom Rauch |
|---|---|
| Next by Date: | Topband: T Vertical, Tom Homewood |
| Previous by Thread: | Topband: Reflector, Bill Tippett |
| Next by Thread: | Topband: T Vertical, Tom Homewood |
| Indexes: | [Date] [Thread] [Top] [All Lists] |