| To: | "Tony Reynolds" <kb8jvh@reydata.com>, <topband@contesting.com> |
|---|---|
| Subject: | Re: Topband: radial layout and pattern skew |
| From: | "Bob Tellefsen" <n6wg@comcast.net> |
| Date: | Sun, 5 Sep 2004 14:34:38 -0700 |
| List-post: | <mailto:topband@contesting.com> |
Tony There must be more to it than that. My vertical has a nearly circular pattern, maybe 0.25 dB "front to back ratio". The vertical is at the center of one edge of a rectangular overhead counterpoise, and the five top loading wires are all placed symmetrically over the counterpoise. If you are interested, I can email you the EZNEC model for you to see. 73, Bob N6WG _______________________________________________ Topband mailing list Topband@contesting.com http://lists.contesting.com/mailman/listinfo/topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | RE: Topband: radial layout and pattern skew, Eric Scace K3NA |
|---|---|
| Next by Date: | Re: Topband: radial layout and pattern skew, Earl W Cunningham |
| Previous by Thread: | Re: Topband: radial layout and pattern skew, Tony Reynolds |
| Next by Thread: | RE: Topband: radial layout and pattern skew, Robert McGwier |
| Indexes: | [Date] [Thread] [Top] [All Lists] |