Hi!
I am planing to shunt feed my rotating tower. There are four yagis on it 5el
15m up 130', 5el 20m up 120', 4el 17m up 110' and 5 el 10m up 100' the first
guy wire bearing ring is up 92' and the second 46' so I must put the gamma rod
going inside the bearing rings so it is only a few inches from the tower on
those points My question is what would be the best spacing and lenght for
gamma rod to start. The upper guy wires (4) are cutted for 80 m half slopers.
73's John OH3SR
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|