I'm considering shunt feeding of a 45 foot freestanding tower with a 3L SteppIR on top for 160 and
80. The SteppIR is NOT electrically connected; the tower IS grounded,,, each leg has a 32 feet of #4
solid copper with ground rods at 16 and 32 feet. The possibility of using the SteppIR as a tunable
cap is interesting... has anyone tried this? If so, have you run full power thru it? Did you use a
relay to connect the SteppIR?
73, Jerry K3BZ
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|