In a message dated 11/21/05 11:53:04 AM Greenwich Standard Time,
btippett@alum.mit.edu writes:
Terminate it with non-inductive 470 ohms and
check several frequencies with your analyzer to verify SWR does not
swing widely.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On this thought........
What exactly does swing wildly mean? On a frequency range from 1.8-7.0 what
should one expect? My situation is a little different in that I use 75 ohm
hardline buried to the beverages and use the MFJ 259 which is designed for 50
ohms. Most of the band from 1.8 to 7.0 measures around close to 1:1 to around
2:1 which I assume is not too bad.
Bill K4XS
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|