'allo,
I have got 1000m / 3280ft of wire to be used for
radials.
At the moment my garden is 40m x 40m (130ft x 130ft).
The
In the winter the ground conductivity is OK to good.
How would you use this wire to make your ground
screen?
Up to now I have been using elevated radials (some
times going into my neighbours garden, temporarily).
I am QRV on 160/80 and sometimes 40m.
I have a few ideas,
1) Cut it into 20m (60ft) lengths and joint them as
necessary.
2) Cut it in to 8 1/2w radials for each band, 24
radials in total 8x80m(260ft) 8x40m(130ft) and
8x20m(60ft).
3) As above but 16 1/4w radials for each band.
3) Make a grid across the entire garden and carry on
using the elevated radials.
I MAY be getting quite a bit more wire in the future.
Thanks for your thoughts,
Robert F5VHN(at)yahoo.com (at)=@ (to stop the spam)
___________________________________________________________
The all-new Yahoo! Mail goes wherever you go - free your email address from
your Internet provider. http://uk.docs.yahoo.com/nowyoucan.html
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|