Hi reflectees !
I would not advise anyone to run Vacuum relays with underrated voltage.The
HF-current allowance is a direct function of the contact surface, and that is a
direct function of contact pressure and in a "Non-latching"-relay that again is
a function of coil current. In short words it may result in reduced current
ability and burnt out contacts !! Either use correct Voltage or go for
"latching-relays" vacuum style.
73 de wolf df2py
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|