You guys think you have accuracy problems. I am using the AIM4170 to
do measurements at 144 mHz . Now, there is where care is really
needed. I've learned to handle all the offsets and have successfully
made several 50 Ohm 4-way power dividers (using 3 "T's" of course)
for the 2 meter array modifications that are currently underway here.
There was a lot of cut & try involved, but it was possible to make
some pretty accurate parts. Sure beats my Autek for repeatability.
Dave, W5UN
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|